100mmx100mm VESA mounting bracket to light stand for monitor.
VFGadgets VESA Monitor Mount bracket - PLM16Add accessories to the PLM16 Monitor Mountplm16-fld-1Thumbscrews and Phillips head screws included with PLM16 mountplm16-3VFGadgets VESA Monitor mounting bracket - PLM16PLM16 Mount with 200mm x 200mm VESA adaptor on 32" TV

VESA Monitor Mount for 5/8″ Spigot light stand- Friction-Lock – PLM16

USD$148 USD$130

(ON SALE Until May 31)

Perfect rental house tough solution for mounting your 17″ to 32” broadcast monitors to a light stand or c-stand for studio and on location shoots. Made from 6061 aircraft aluminum. Also includes 2x 1/4-20″ and 2x 3/8-16 threaded holes for mounting accessories like articulating arms to the PLM16 mount.

Description

The VFGadgets PLM16 VESA Monitor Mount for 5/8″ spigot is an excellent solution for mounting your production monitor, (17″ through 32”) to a light stand or C-stand for studio and on location shoots.

This lightweight monitor mounting bracket has 2x Friction-Lock pivot points, allowing for quick and easy positioning of your monitor for ideal viewing. The 2x pivot point positioning on the PLM16 Mount adds to the ability of moving the centre of gravity of a heavier monitor closer to the light or C-stand centre for more balanced holding power.

The PLM16 Monitor Mount is strong enough to support a broadcast monitor with a sunshade for exterior shots. It’s built rental-house tough from high quality, lightweight, 6061 aircraft aluminum and supports up to 40 lbs thanks to an improved friction locking system on the adjustment point.

The easy to use quick release thumbscrew design works well in combination with most 17″- 26″ carrying cases with Integrated hood (such as FSI cases) allowing you to switch quickly between desktop and light/c-stand use. (packing width of monitor mount is 2 3/4” / 6.98 cm)

plm16-cu-400With 1/4-20” and 3/8-16” thread holes on the top and the side of this monitor mount arm, you are able to add such accessories as a magic arm or a hot shoe mount to the monitor mount arm. (Great for adding a Teradek or Boxx unit to your monitor set up)

With a set of 4x quick removable thumb screws and a set of 4x standard M4 Phillips head screws included, you have a choice of quickly removing or permanently mounting your monitor to the PLM16 mount. The choice is there for you.

Features

• Set of 4x Quick Removable Thumb Screws and a set of 4x standard M4 phillips head screws included
2x 1/4-20” and 2x 3/8-16” mounting threads for mounting additional accessories to PLM16 (such as flex arms or cold shoes)
• 100mm x 100mm / 75mm x 75mm VESA mounting plate pattern
• Works on any light stand or c-stand with 5/8″ (16mm) male spigot
• Made of lightweight 6061 grade anodized aluminum
• Supports monitor weights up to 40lb
• 2 adjustable levers for maximum flexibility of monitor to set the centre of gravity.
• Compatible with all 17″ through 32″ monitors with VESA standard 100mm x 100mm / 75mm x 75mm mounting holes on back of monitor
• Weighs just 652 grams (1.43 lbs)

Reviews

  1. (verified owner):

    Gave the PLM16 a try and love it! It has (2) 1/4-20 and (2) 3/8 threaded holes in the back which are AWESOME!!! Every mount needs this these days with all the crap that gets mounted to the back of monitors with wireless and all. I used the mount combined with the 100mm to 200mm adapter with my 40″ samsung TV in a chase vehicle yesterday doing car-to-car and the mount and adapter held up great! I had to drill larger holes in the adapter bracket because samsung uses m8 instead of standard m6, but it wasn’t much trouble. I would have preferred my ball lock mount to the friction mount while in the VTR van, but the friction lock held strong all day, even driving 20mph on rough dirt roads.

Add a review

Your email address will not be published. Required fields are marked *