For use with the EX1 Teleplate or EX3 Teleplate, this lightweight yet rugged power distributor shares 12V DC power from a single supply between 2 cameras and 5 accessories.

The distributor's weight provides an excellent shoulder stabiliser.

This distributor has 7 power outputs: 2 for cameras and 5 for accessories such as LCD monitors, lighting and radio links.

The power input is provided by an XLR-4 connector or a choice of an optional Anton Bauer, V-lock or PAG battery plate.

The distributor also comes with a protective connector cover.

Mounted on Teletest's optional EX1/EX3 Teleplate and shoulder mount it provides excellent camera balance for comfortable and strain free use during long shoots.

When used on Steadicams, it also acts as a counter balance.
Power input: 12-14VDC
Power switch: 2 position rocker
Input DC connector: XLR-4 plug (pin1= GND, pin4= +V)
Output DC connectors For cameras: 2 x 2.5mm skt (centre= positive)
Output DC connectors For accessories: 5 x 2.1mm skt (centre= positive)
Battery adapter: PAG, Anton Bauer or V-Lock - factory fit
Battery adapter connector : 4pin plug (pin1= GND, pin2= +12V, pin3= N/C, pin4=+12V out)
Low battery indicator: Red LED - illuminates below 10.5VDC
Power channel indicators: 7 x green LEDs - extinguishes if fused
Fuses: 1 x main fuse - 10A 5x20mm antisurge fuse, 7 x auto reset fuse - 60 secs approx delay for reset
Housing: Aircraft grade aluminium, hard anodized black
Mounting: 4 x fixing holes for knurled thumbscrew nuts (included), Sliding frame for mounting on 'Teleplate' shoulder
stabiliser/3D 'Binorig'
Weight: 500g
Dimensions: 145mm long x 95mm wide x 32mm high

Included Accessories:
4 x Thumb turn screws
7 x Fixing screws
1 x protective connector cover